Panini Waffletechnology Check Scanner Cleaning Card, 15 cards/box
Panini Waffletechnology Check Scanner Cleaning Card is an approved product by Panini for use on the My Vision X® Check Scanners. This product is designed to work with Panini My Vision X® Check Scanners through strategic positioning of the Waffletechnology design. This product was developed and tested to be an effective method of quickly cleaning critical camera lenses and pathways within the device, used by the banking industry under the Check 21 laws and provisions. “In a distributed capture environment, cleaning the check scanner is very important,” says Doug Roberts, President, Panini North America. “This new product provides end-users with a simple first step to cleaning the My Vision X®.”
Checks Scanners accumulate dirt from the pollutants in the environment and by being handled. This dirt collects and clouds the optical lenses inside which are the most critical component of the scanner. These optics allow the imaged check to become a legal document for check clearing as stated in the Check 21 law. The ability of the scanner to properly create the image is why the optics are the most critical component of the scanner. Panini Waffletechnology Check Scanner Cleaning Cards were developed to clean the scanners optics of built up dirt and ink. In addition, it will also clean the magnetic heads and the transport roller mechanisms that allow the check to pass through the scanner. This card, when used as a consistent maintenance product, will keep your Panini Vision X® and My Vision X® Check Scanners performing as designed.
Waffletechnology is an advancement in cleaning card technology. The Cleaning waffles are flexible raised platforms. These platforms allow the card to clean previously unreachable areas within the check scanner. Now more dirt is removed making your check scanner cleaner and more reliable than ever before.
* 4.25” wide x 7.25” long
* Available in boxes of 15 cards
* Approved by Panini
* Eliminate dirt and ink buildup with a cleaning card
* Reduces residue build-up without dismantling equipment
* Quick, easy, inexpensive preventative maintenance
Recommended Usage: It is recommended to run moist cleaning cards through check scanners weekly.
Usage Directions:
1) Remove the ink cartridge from the machine if present.
2) Start an application which will feed documents such as Capture Application, MyDemo, etc.
3) Run the cleaning card through the My Vision X® 3-7 times, each time rotating the cleaning card top to bottom as well as flipped over so the cleaning card is inserted each time with a different orientation.
4) Cancel the application, discard the used cleaning card, and replace the ink cartridge if needed.
Note: The cleaning card is not intended to remove debris from the track, clean the sensors, clean the ink cartridge, or replace the cleaning procedures outlined in the operator manual.
